Chainsaws

SENWART chainsaws offer unrivaled power and innovation. Our goal is to provide you with the best chainsaws. Chainsaws are an efficient tool used by loggers to cut down trees, but they aren't the only group of people who need them, builders, gardeners, and homeowners can also benefit from a variety of chainsaws.

What type of chainsaws can we make?

Motor Engine

Chainsaws are divided into gasoline and electric engines, gasoline chainsaws have displacement from 25cc to 110cc. Senwart's gasoline chainsaws use high-quality cylinder, crankshaft, and piston. It can be used for 200-300 hours of continuous working hours.

Guide Bar Length

The length of a chainsaw's guide bar determines the type of work it's best suited for, but there are a few things to know. Longer bars (24 in and longer) may look intimidating, but they're actually relatively easy to control. Taller pole saws with short shafts (usually 10 in) look like mini chainsaws. They're small and seem more approachable, but they can be more unpredictable and dangerous for novices.

• 6" to 8" in - Trim bushes.

• 10" to 12" in - Remove branches and cut smaller tree logs.

• 14" in - Small trees, cutting logs, and chopping wood.

• 14" to 16" in - Cutting firewood

• 16" to 18" in - Cut down medium-sized trees

• 20" in - Cut down a lot of trees

• 30" in and larger - Cut down the biggest trees

Noise

You may want to consider how much noise a chainsaw makes. Gasoline chainsaws can be deafening - 110 dbs, so it's best to do your logging in the morning and afternoon when the number of people sleeping is likely to be at its lowest. Even some electric, battery chainsaws are a bit loud, and the chain makes noise as it rips up the wood anyway.

Weight

Weight is probably the most important consideration for chainsaws. Electric chainsaws and battery chainsaws are usually the lightest chainsaws on the market. They don't need to carry the weight of a full tank of gasoline, and they have smaller motors, making them lighter and easier to use in a variety of scenarios.

Chainsaw Handle

Chainsaw handles are made of rubber. Some chainsaws have two handles, and the rear handle also contains the trigger and safety switch that activates the chainsaw. The front handle surrounds the chainsaw and gives you stable control of the chainsaw for precise cuts. Senwart chainsaws are made of a new rubber material for a longer service life.

Lubrication Chain

Because of the high friction during cutting, the oiling system is one of the most important features to look out for. Most SENWART chainsaws have an automatic oiling system. This adjustable oiling system helps to prevent being lubricated when idle, thus saving a lot of lubricant.

Chainsaw Spare Parts

Our chainsaws are one of the best chainsaws in the world. Wholesale original chainsaw spare parts, will greatly increase the service life of your chainsaw and increase your competitiveness in the market.

The chainsaw case can protect you from accidental scratches when carrying or storing your chainsaw. At the same time, the chainsaw case can also hold and prevent the lubricant on the linkage from staining your clothes.

Chain: there are three main types of chainsaw chains. They are available in full chisel, half chisel, and fine chains, each used for different tasks. Wholesale Senwart chainsaw chains can increase the versatility of chainsaws

Guide Bar: The standard guide bar has a cutting length range of 20 to 90 cm. Wholesale SENWART guide bars give you the freedom to change the guide bar on your chain saw according to the job you are doing when you are doing simple pruning or cutting thick trunks.

Additional Features

• Variable Speed: Some low-end chainsaws offer only a single speed, but high-end chainsaws offer variable speed control. The speed of these chainsaws is regulated by pressure-sensitive triggers for different types of cuts.

• Anti-vibration: Some vibration is inevitable during the cutting process. SENWART uses a special engine mount to minimize vibration. A spring-loaded handle further protects the user from vibration.

• Spring-assisted start: Some chainsaws have a spring-assisted start feature that reduces the pulling force on gasoline chainsaws and increases the success rate of starting.

• Safety features: Chainsaws manufactured by SENWART are equipped with several safety features. For example, an inertia chain brake. The brake senses rapid changes in inertia caused by recoil and locks the chain. This feature will ensure the safety of the user if recoil occurs on the chain saw. Low rebound chains also minimize the effects of kickbacks.