If you want to know how to cut trees with a gasoline chainsaw, this is the best option. Gasoline chainsaws are the most efficient way to cut down trees and branches. Gone are the days of using an ax or hand saw to fell trees. With each new model, chainsaws get better and better, offering a new world of performance and making our lives easier.

Gasoline chainsaws are outdoor tools with a mechanical chain with teeth along the guide bar, which can easily cut heavy wood and trees. This blog focuses on the process and methods of cutting wood with a gas chainsaw.

Before we continue, let's look at the basics.

1. How do you start a gasoline chainsaw?

Place the gasoline chainsaw on stable ground and clear all obstacles, such as objects, people and pets. Squeeze the chain brake to activate it. Release the safety switch and pull the trigger. You must continue to pull the trigger until the engine fully starts. However, the starting process differs between battery-powered and gasoline-powered chainsaws.

2. How do you cut a tree with a gasoline chainsaw?

The entire cutting process is done in three main steps: cutting, pruning and bending. However, if you don't want to cause damage around the tree, there are a few things you should check before you start felling.

1) Check the license.

Check the area you are going to cut down. In some areas a license may be required to cut down trees.

2) Preparation.

Move around the area before cutting down the tree. If it is a large tree and there are other smaller trees nearby, they can also fall from the tree. Also check power lines and nearby homes. Based on the location and the tree, decide where the tree should fall. Once the task is completed, you will need a suitable truck to return the logs.

3) Check the condition of the gasoline chainsaw.

Before starting the task, check the condition of the gasoline chainsaw. If the blades appear dull, use a gasoline chainsaw grinder to prepare the blades for intense log cutting.

4) Get the safety equipment.

Make sure you are prepared to perform the task. Equip yourself with gasoline chainsaw accessories and safety equipment such as a helmet, safety shoes, glasses, ear muffs, and cut-resistant gloves.

5) In action: cutting wood

The cutting process consists of making a frontal cut on the torso. There are three types of front cuts to choose from.

(i) Open notch cuts, varying between 70° and 90°.

(ii) Traditional 45 degree notch cut. The bottom of the cut is flat and the top is slanted.

(iii) For traditional cuts, you must cut 1 inch above the bottom cut. Remember to use a gasoline chainsaw blade to cut in the direction you want the tree to fall.